Skip to main content

Vibrocultivator tine 2472 in 32x12mm

Vibrocultivator tine 2472 in 32x12mm

Danish-type tine 32x12mm available with one hole or with two holes 30mm apart depending on the cultivator to be fitted. Can be fitted with 32x10mm reinforcement. These tines are recommended for fitting on frames up to 60mm without reinforcement and on 50mm frames with reinforcement. Bellota offers clamps for fitting this tine on 50x12, 50x14 and 50x50mm frames.

Main product specifications

Ref.	G	A	B	C	D	M	Grs.	B	S
2472	32x12	344	490	230	13	M10	3210	288	2474-1
2472 C2A	32x12	354	500	230	13	M10	3210	288	2474-1
2474-1	32x10	201	122	13x20			1350	500	2470-2472

Clamps, See page

2472 fits with 1505 See page / 1543 See page / 1544 See page / 1552 See page / 15001 See page / 15054 CA See page

2472 C2A fits with 15054 CA3 See page / 15098 See page

Clamps for S-Tines

Clamps for S-Tines

Reversible point for vibro cultivator 1505

Reversible point for vibro cultivator 1505

Reversible point Kongskilde 101000640

Reversible point Kongskilde 101000640

Goose foot point Kongskilde 101000644

Goose foot point Kongskilde 101000644

Swallow Point 1552 for Cultivator Tines

Swallow Point 1552 for Cultivator Tines

Cultivator Kongskilde 100323040

Cultivator Kongskilde 100323040

Swallow Point 15054 for Cultivator Tine

Swallow Point 15054 for Cultivator Tine

Swallow Point 15098 for Cultivator Tine

Swallow Point 15098 for Cultivator Tine

CLAMPS DEPENDING ON THE CHASSIS

Ref.	50x12	50x14	50x50
2472	12472-5012 / 12472-5012R	12472-5014	12470-5050 / 12470-5050R

FRAME WHERE FITS

Ref.	BASTIDOR MÁXIMO (mm.)	BASTIDOR MÁXIMO (mm.)
	Solo brazo	Con Refuerzo 2474-1
2472	60	50